Accessories - Sensors and Brackets
Simplify rack environmental management with Enlogic plug and play sensors. Every Enlogic Rack PDU and Inline Energy Meter is designed to accommodate up to 6 external sensor probes with user customizable alarms and warnings.
Each sensor is engineered with an embedded analog-digital signal processing microchip for extended range and high accuracy operation.
Every sensor probe is factory calibrated and designed for easy installation, setup, and identiﬁcation.
|EA9101||Alarm Beacon||For use with EN series PDUs or EZ series Inline Energy Meters.||Install Guide|
|EA9102||Temperature Sensor||Enlogic's temperature and humidity sensors are designed to add comprehensive environmental monitoring to any Enlogic EN Series PDU or EZ Series Inline Energy Meter.||Install Guide|
|EA9103||Temperature & Humidity Sensor||The Temperature and Humidity Sensor Monitors the temperature and Relative Humidity in the Data Center and transfers the data to the control center.||Install Guide|
|EA9105||3 Temperature & 1 Humidity Sensor||Enlogic's temperature and humidity sensors are designed to add comprehensive environmental monitoring to any Enlogic EN Series PDU or EZ Series Inline Energy Meter.||Install Guide|
|EA9106||3 Sensor Input Hub||Enlogic's 3 Sensor Input Hub allows for 3 additional sensor ports to be added to either sensor port of any Enlogic EN Series PDU or EZ Series Inline Energy Meter.|
|EA9109||Door switch sensor||Enlogic's Door Switch Sensor is designed to send an alarm or notification signal when the door on which is installed had been opened more than 10mm.||Install Guide|
|EA9110||Dry Contact Input Cable||Enlogic's Dry Contact Cable is designed to monitor conditions such moisture detection, motion, door sensor, and access through external dry contact sensors.||Install Guide|
|EA9111||Spot Leak Sensor||Spot fluid sensor monitors a remote location for the presence of any liquid with resistivity of less than 2M Ohms per cm (including distilled water) and transfers the data to the control center.||Install Guide|
|EA9112||Rope Leak Sensor||The Rope Fluid Leak Sensor monitors for early detection of liquid with a resistivity of less than 2M Ohms per cm (including distilled water) in the monitored area along the entire length of the rope.||Install Guide|
|EA9116||Smoke Sensor||For use with EN series PDUs or EZ series Inline Energy Meters.|
|EA9119||Serial Communication Cable||Serial Communication Cable, RJ-45 to DB-9||Install Guide|
|EA9120||Mounting Brackets||Rittal/HP cabinet bracket|
|EA9125||Automatic Rack Light Kit||LED Light Strip Sensor||Install Guide|
|EA9130||Rack Access Kit||Rack Access Kit|